Oil Level Controllers

KENCO Oil Level Controllers are designed to maintain the running oil level in the crankcase of stationary engines, compressors, and mechanical lubricator boxes. The KENCO oil controller works in conjunction with an overhead oil supply system which feeds the oil level controller. As the oil is consumed, the oil controller supplies the required amount of oil to maintain a proper level in the crankcase. The oil controller maintains the proper amount of oil in the crankcase using a float controlled valve. The valve opens and closes as oil is needed in the crankcase to provide a constant oil level. The oil level switch in the KLCE is an electric switch in an explosion proof enclosure, rated for hazardous hydrogen gas environments. The float switch monitors the oil in the crankcase. The level within the crankcase directly corresponds with the oil level in the oil level controller housing. If the oil level in the crankcase drops 3/4″ past the centerline, the switch will trip sending an alarm.

Reduces maintenance by maintaining a constant lube level.

Protects against lubrication failure.

Controller mechanism fully removable without draining oil

Easy view convex sight window

High pressure applications up to 70 psig (4.82 bar)

Fire Safe Valves Available

Oil inlet allows for piping configuration from any direction

Oil outlets on either side of housing and in the bottom to allow for various piping configurations

Easy access to switch float through 3/8″ vent hole in top of housing for simple testing of switch operation

Direct mount adapters eliminate equalizing problems and reduce installation costs

Models available with multiple switches to measure high and low levels or low/low levels (See KHL, KSHL, KSLL)

Oil level controllers for synthetic oil applications now available

CSA & ATEX Approved explosion proof switch enclosure

From selection to pricing, our qualified team is ready to support you—request your quote today.

The KENCO Oil Level Controllers are designed to maintain the running oil level in the crankcase of stationary engines, compressors, and mechanical lubricator boxes. The KENCO oil controller works in conjunction with an overhead oil supply system which feeds the oil level controller. As the oil is consumed, the oil controller supplies the required amount of oil to maintain a proper level in the crankcase. The oil controller maintains the proper amount of oil in the crankcase by using a float controlled valve. The valve opens and closes as oil is needed in the crankcase to provide a constant oil level. The oil level switch in the K512 is a case to ground electric switch contact for non-hazardous locations. The level within the crankcase directly corresponds with the oil level in the oil level controller housing. If the oil level in the crankcase drops past the designated level, the switch will trip sending an alarm.

Reduces maintenance by maintaining a constant lube level.

Protects against lubrication failure

Controller mechanism fully removable without draining oil

Adjustable mounting slots on back of casting eliminate need for mounting adapters

Easy view convex sight window

Switch test button available

Fire Safe Valves available

Oil outlets on either side of housing and in the bottom to allow for various piping configurations

Direct mount adapters eliminate equalizing problems and reduce installation costs

From selection to pricing, our qualified team is ready to support you—request your quote today.

KENCO Oil Level Controllers are designed to maintain the running oil level in the crankcase of stationary engines, compressors, and mechanical lubricator boxes. The KENCO oil controller works in conjunction with an overhead oil supply system which feeds the oil level controller. As the oil is consumed, the oil controller supplies the required amount of oil to maintain a proper level in the crankcase. The oil controller maintains the proper amount of oil in the crankcase by using a float controlled valve. The valve opens and closes as oil is needed in the crankcase to provide a constant oil level. The oil level switch in the KHL is an electric switch in an explosion proof enclosure, rated for hazardous hydrogen gas environments. The float switch monitors the oil in the crankcase. The level within the crankcase directly corresponds with the oil level in the oil level controller housing. If the oil level in the crankcase drops or rises 3/4″ past the centerline, the switch will trip sending an alarm.

• Reduces maintenance by maintaining a constant lube level.
• Protects against lubrication failure
• Controller mechanism fully removable without draining oil
• Easy view convex sight window
• High pressure applications up to 70 psig (4.82 bar)
• Fire Safe Valves Available
• Oil inlet allows for piping configuration from any direction
• Oil outlets on either side of housing and in the bottom to allow for various piping configurations
• Easy access to switch float through 3/8″ vent hole in top of housing for simple testing of switch operation
• Direct mount adapters eliminate equalizing problems and reduce installation costs
• Oil level controllers for synthetic oil applications now available
• CSA & ATEX Approved explosion proof switch enclosure

From selection to pricing, our qualified team is ready to support you—request your quote today.

KENCO Oil Level Controllers are designed to maintain a running oil level in the crankcase of stationary engines, compressors, and mechanical lubricator boxes. The KENCO Oil Level Controller works in conjunction with an overhead oil supply system which feeds the Oil Level Controller. As the oil is consumed, the oil controller supplies the required amount of oil to maintain a proper level in the crankcase. The Oil Controller maintains the proper amount of oil in the crankcase by using a float controlled valve. The valve opens and closes as oil is needed in the crankcase to provide a constant oil level. The Kenco KSHL is constructed with two independent switches, one for high level alarm 3/4″ above centerline and another for low level alarm at 3/4″ below centerline. The oil level switches in the KSHL are electric switches in an explosion proof enclosure, rated for hazardous hydrogen gas environments.

• Reduces maintenance by maintaining a constant lube level.
• Protects against lubrication failure
• Controller mechanism fully removable without draining oil
• Easy view convex sight window
• High pressure applications up to 70 psig (4.82 bar)
• Fire Safe Valves Available
• Oil inlet allows for piping configuration from any direction
• Oil outlets on either side of housing and in the bottom to allow for various piping configurations
• Easy access to switch float through 3/8″ vent hole in top of housing for simple testing of switch operation
• Direct mount adapters eliminate equalizing problems and reduce installation costs
• Oil level controllers for synthetic oil applications now available
• CSA & ATEX Approved explosion proof switch enclosure

From selection to pricing, our qualified team is ready to support you—request your quote today.

KENCO Oil Level Controllers are designed to maintain a running oil level in the crankcase of stationary engines, compressors, and mechanical lubricator boxes. The KENCO Oil Level Controller works in conjunction with an overhead oil supply system which feeds the oil level controller. As the oil is consumed, the oil controller supplies the required amount of oil to maintain a proper level in the crankcase. The oil controller maintains the proper amount of oil in the crankcase by using a float controlled valve.The valve opens and closes as oil is needed in the crankcase to provide a constant oil level. The Kenco KSLL is constructed with two independent switches, one for low level alarm 5/8″ below centerline and another for low level alarm at 7/8″ below centerline. The oil level switches in the KSLL are electric switches in an explosion proof enclosure, rated for hazardous hydrogen gas environments. The float switches monitor the oil in the crankcase. The level within the crankcase directly corresponds with the oil level in the oil level controller housing. If the oil level in the crankcase drops past the designated levels, the switches will trip sending an alarm.

• Reduces maintenance by maintaining a constant lube level.
• Protects against lubrication failure
• Controller mechanism fully removable without draining oil
• Easy view convex sight window
• High pressure applications up to 70 psig (4.82 bar)
• Fire Safe Valves Available
• Oil inlet allows for piping configuration from any direction
• Oil outlets on either side of housing and in the bottom to allow for various piping configurations
• Easy access to switch float through 3/8″ vent hole in top of housing for simple testing of switch operation
• Direct mount adapters eliminate equalizing problems and reduce installation costs
• Oil level controllers for synthetic oil applications now available
• CSA & ATEX Approved explosion proof switch enclosure

From selection to pricing, our qualified team is ready to support you—request your quote today.

The KENCO Oil Level Controllers are designed to maintain the running oil level in the crankcase of stationary engines, compressors, and mechanical lubricator boxes. The KENCO oil controller works in conjunction with an overhead oil supply system which feeds the oil level controller. As the oil is consumed, the oil controller supplies the required amount of oil to maintain a proper level in the crankcase. The oil controller maintains the proper amount of oil in the crankcase by using a float controlled valve. The valve opens and closes as oil is needed in the crankcase to provide a constant oil level. The oil level switch in the KLCM is an electric switch in a CSA approved Class III, Type 4 enclosure. The float switch monitors the oil in the crankcase. The level in the crankcase directly corresponds with the oil level in the oil level controller housing. If the oil level in the crankcase drops 3/4″ past the centerline, the switch will trip sending an alarm.

• Reduces maintenance by maintaining a constant lube level.
• Protects against lubrication failure
• CSA approved Class III, Type 4
• Controller mechanism fully removable without draining oil
• Easy view convex sight window
• High pressure applications up to 70 psig (4.82 bar)
• Fire Safe Valves available
• Oil inlet allows for piping configuration from any direction
• Oil outlets on either side of housing and in the bottom to allow for various piping configurations
• Switch test button standard
• Direct mount adapters eliminate equalizing problems and reduce installation costs
• Oil level controllers for synthetic oil applications now available

From selection to pricing, our qualified team is ready to support you—request your quote today.

KENCO Oil Level Controllers are designed to maintain the running oil level in the crankcase of stationary engines, compressors, and mechanical lubricator boxes. The KENCO Oil Controller works in conjunction with an overhead oil supply system which feeds the oil level controller. As the oil is consumed, the oil controller supplies the required amount of oil to maintain a proper level in the crankcase. The oil controller maintains the proper amount of oil in the crankcase using a float controlled valve. The valve opens and closes as oil is needed in the crankcase to provide a constant oil level. The oil level switch in the KLCP is a pneumatic float switch which monitors the oil in the crankcase. The level within the crankcase directly corresponds with the oil level in the oil level controller housing. If the oil level in the crankcase drops 3/4″ past the centerline, the pneumatic switch will trip, sending an alarm.

• Reduces maintenance by maintaining a constant lube level.
• Protects against lubrication failure
• Controller mechanism fully removable without draining oil
• Easy view convex sight window
• High pressure applications up to 70 psig (4.82 bar)
• Fire Safe Valves available
• Oil inlet allows for piping configuration from any direction
• Oil outlets on either side of housing and in the bottom to allow for various piping configurations
• Switch test button standard
• Direct mount adapters eliminate equalizing problems and reduce installation costs
• Oil level controllers for synthetic oil applications now available

From selection to pricing, our qualified team is ready to support you—request your quote today.

KENCO Oil Level Controllers are designed to maintain the running oil level in the crankcase of stationary engines, compressors, and mechanical lubricator boxes. The KENCO oil controller works in conjunction with an overhead oil supply system which feeds the oil level controller. As the oil is consumed, the oil controller supplies the required amount of oil to maintain a proper level in the crankcase. The oil controller maintains the proper amount of oil in the crankcase by using a float controlled valve. The valve opens and closes as oil is needed in the crankcase to provide a constant oil level.

• Reduces maintenance by maintaining a constant lube level
• Controller mechanism fully removable without draining oil
• Easy view convex sight window
• High pressure applications up to 70 psig (4.82 bar)
• Fire Safe Valves available
• Oil inlet allows for piping configuration from any direction
• Oil outlets on either side of housing and in the bottom to allow for various piping configurations
• Direct mount adapters eliminate equalizing problems and reduce installation costs
• Oil level controllers for synthetic oil applications now available

From selection to pricing, our qualified team is ready to support you—request your quote today.

Oil Level Switches are designed as a safety device for the stationary engine or compressor. The Oil Level Switch monitors the oil in the crankcase. The level in the crankcase directly corresponds with the oil level in the Oil Level Switch housing. The engine or compressor constantly consumes the oil from the crankcase. If the oil level in the crankcase drops past the designated level, the switch will trip sending an alarm.

• Protects against lubrication failure
• Switch mechanism fully removable without draining oil
• Easy view convex sight window
• Direct mount adapters eliminate equalizing problems and reduce installation costs
• Oil level switches for synthetic oil applications now available
• CSA & ATEX Certified explosion proof switch enclosure

From selection to pricing, our qualified team is ready to support you—request your quote today.

Oil Level Switches are designed as a safety device for the stationary engine or compressor. The Oil Level Switch monitors the oil in the crankcase. The level within the crankcase directly corresponds with the oil level in the oil level switch housing. The engine or compressor constantly consumes the oil from the crankcase. If the oil level in the crankcase drops past the designated level, the switch will trip sending an alarm.

• Protects against lubrication failure
• Switch mechanism fully removable without draining oil
• Easy view convex sight window
• Fire Safe Valves available
• Switch test button standard
• Direct mount adapters eliminate equalizing problems and reduce installation costs
• Oil level switches for synthetic oil applications now available

From selection to pricing, our qualified team is ready to support you—request your quote today.

507 Series Oil Level Controllers automatically monitor and control the amount of oil in the lubricator housing. This keeps all of the working parts including the pump plungers submerged in oil to reduce wear and corrosion. When the level falls below the operational requirement, the low level safety switch will be activated.

• Valve design eliminates lubricator box overfill due to contaminates in the oil
• Controls oil level in lubricator
• Low level safety switch protects against engine and pump repairs due to lubrication failure
• Inlet pressures up to 60 psig (4.82 bar)
• Non-mercury switch will not react to vibration

From selection to pricing, our qualified team is ready to support you—request your quote today.

Subscribe to our bulletin and access valuable information about process optimization, equipment reliability, and new certified solutions from Lamar USA.