7000 Series Injection Rate Gauge

The 7000 Injection Rate Gauge is of the same construction as the 5700 Gauge but is provided with a spring-loaded test valve similar to the valve supplied on the 779 Drum Gauge. The test valve is used to isolate the chemical supply tank from the gauge to conduct a one minute calibration test for the chemical pump.

The test valve has a 1/2″ coupler welded to the side for mounting the 7000 Gauge to the valve. The valve mounts in the 3/4″ outlet of a 55 gallon horizontal drum. The bottom connection for the chemical pump suction line is 1/4″ NPT. The test valve is available in either zinc plated carbon steel or 302/304 stainless steel.

* NOTE: Kenco can provide custom scales to meet the calibration requirements of the 7000 level gauge. The Polycarbonate custom scales are usually engraved and paint-filled. If you are needing scales indicating tank volume or other scale calibrations, please consult the factory.

From selection to pricing, our qualified team is ready to support you—request your quote today.

Subscribe to our bulletin and access valuable information about process optimization, equipment reliability, and new certified solutions from Lamar USA.